Grandstream Networks GXW40XX - Change Log; Changes from 1.0.5.10 User Manual

FIRMWARE VERSION 1.0.6.8 GXW40XX USER MANUAL Page 6 of 59
CHANGE LOG
This section documents significant changes from previous versions of GXW40xx user manuals. Only
major new features or major document updates are listed here. Minor updates for corrections or editing
are not documented here.
CHANGES FROM 1.0.5.10 USER MANUAL
 Add the option to change the Voice Frames per TX. [Voice Frames per TX]
 Add a configuration parameter to override User-Agent header [Use SIP User-Agent Header]
 Added new Prompt Tone and Prompt Tone Access Code[Prompt Tone Access Code]
 Added Send SIP log in Syslog [Send SIP Log]
 Add NTP update interval option [NTP Update Interval]
 Added support for webUI for OK and Apply Changes
 Add option to Enable/Disable FXS Ports [Enable Port]
 Changed the device design to accept parameters without requiring reboot