Grandstream Networks GXW4248 User Manual

FIRMWARE 1.0.3.4 GXW4248 USER MANUAL PAGE 46 OF 54
Use # as Dial Key
Allows users to configure the “#” key as the “Send” (or “Dial”) key. If set to “Yes”, “#” will send
the number. In this case, this key is essentially equivalent to the “Dial” key. If set to
“No”, this
“#” key can be included as part of number.
No Key Entry
Timeout
Default is 4 seconds. Call will be completed within this time interval if no additional key entry
occurs.
Off-Hook Auto-
Dial Delay
Determines how many seconds after off-hook to wait before autodialing the extension set under
Advanced Port Settings. The range is 0 to 60 seconds.
Enable Call
Features
Default is Yes. (If Yes, call features using star codes will be supported locally)
Disable Call
Waiting
Default is No. If set to YES Call Waiting indication information will not be provided to analog
phone connected to this FXS port.
Disable Call
Waiting Caller ID
Default is No. If set to YES Call Waiting caller ID will not be provided to analog phone
connected to this FXS port.
Disable Call
Waiting Tone
Default is No. This is to disable the stutter Call Waiting Tone when a Call Waiting call arrives.
The CWCID will still be displayed.
Disable Receiver
Offhook Tone
Default is No. If YES, ROH tone will not be played after off hook for 60 seconds.
Disable Reminder
Ring for On-Hold
Call
Default is No. This is to disable the Reminder Ring that is played when a call is waiting on hold
and the analog phone goes on-hook.
Disable Visual
MWI
Visual message indicator is a special on-hook caller ID type message that enables and
disables the message waiting light on certain phones. GXW4248
has this feature enabled by
default. However, certain phones (rare) that do not support it
may mistakenly treat this CID
signal as an incoming call. A configuration option is needed to turn on MWI in this case.
Visual MWI Type
This is the type of signal sent to the analog phone to make it turn the lamp ON upon receiving a
Voice mail. Check the phone’s manual to find out what signal is supported, FSK (default)
or
Neon.
Transfer on
Conference
Hangup
Defines whether the call is transferred to the other party if the conference initiator hangs up.
Disable Bellcore-
style 3-Way
Conference
Disable Bellcore-style 3-Way Conference

Grandstream Networks GXW4248 Specifications

General

Brand	Grandstream Networks
Model	GXW4248
Category	Gateway
Language	English