LED Indicator LED Status
Power
LAN
WAN
Solid: Connected
OFF: Disconnected
T1/E1/J1
Solid: Connected and working
Blinking: No cable is connected; or connected but the link is not working at all.
Table 5: GXW450X LED Indicators
Configuring GXW450X via Web GUI
Web GUI Access
The GXW450X embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML pages allow users to configure the device t
a Web browser such as Microsoft IE, Mozilla Firefox, or Google Chrome.
Figure 3: GXW450X Web GUI Login Page
To access the Web GUI:
1. Connect the computer to the same network as the GXW450X.
2. Ensure the GXW450X is properly powered on and displays the IP address on the LCD screen.
3. Open a web browser on the computer and enter the displayed IP address into the search bar in the following format:
https://ipaddress:portnumber
4. Enter username and password to login. (The default administrator username is “admin” and the default random password can be found on th
sticker on the GXW450X).
Reset Password at First Login
At first login, users will be forced to change the default admin password. The following screen will be shown, enter the requested information to p
To Next Page
Loading...
Need help?
General
