Phone.com Setup and Troubleshooting Guide
Grandstream HT702 Analog Telephone Adapter (ATA)
5 / 7 Revised: 30 October 2012
Call Blocking (cont.)
If you blocked a number by mistake:
● Dial [*][9] again if you are still on the call. You will hear: “This caller has been unblocked.”
● Or, visit the Call Logs section in your Phone.com Control Panel, then click “Call Blocking
Settings.”
Call Recording
As a Phone.com user, you have the ability to record incoming calls. However, please check your current
state and the other party’s state and Federal laws before using this feature.
● Dial [*][7] to start recording. You will hear: “Recording is now on.”
● Dial [*][7] again to stop recording. You will hear: “Recording is now off.”
To review the recording, visit the Call Logs section in your Phone.com Control Panel. Please allow a few
minutes after the call ends for the recording to be available.
To Next Page
Loading...
