13
Press the Power button to turn on your camera, and set the mode to Camera Mode.
1. Press the Menu/OK button.
2. Press the Up/Down button to select scenery per your light condition and environment.
3. Press the Menu/OK button to confirm your selection and exit to standby mode.
Note:
1. After you have selected your scenery, the corresponding scenery icon will appear on the LCD.
Some scenery will automatically activate the flash function after setting. The default scene is Auto.
2. You can press the Left button for setting different scenes quickly.
Image Size
The image size and quality settings determine the number of photos that can be saved and the amount
of memory required for each photo. The higher the photo quality the more memory it will take. The image
size and quality will also affect the maximum size you can print your photo effectively. To set the Image
size:
1. Press the Menu/OK button.
2. Press the Right/Left button until you select the Image Size option.
To Next Page
Loading...