Grant Datalogging Squirrel 2040 Series - Running the Quick Start Demo

4.5 Running Quick Start Demo
1
In the
SquirrelView
A
ssistant,
double click on
Browse. .or select
File - Open from
Logger setup to
open a setfile
Or select the
quick start demo
file appropriate to
your logger type.
1
2
The Logge
r
Setup screen
is now
visible, from
here you will
be able to set
up your
logging
requirements.
Within the Actual
Channels tab
scroll down
e Sensor
T pe column
to Ref.J1.
This will be
the input you
will be
reading in this
example.
Description
can be used to
describe your
setup.
The Job
3
th
y
2
3
Version 2 - July 2004
Page 8
18108