Need help?Do you have a question about the Grant Combi 21e and is the answer not in the manual?
Provides detailed specifications like water content, heat output, connections, and pressures.
Guidance on performing flue gas analysis for commissioning and servicing.
Covers requirements for oil tank positioning, pipework materials, and fire valves.
Details the procedure for connecting the fuel pump to the burner.
Instructions on mounting the boiler and related pipework considerations.
Procedures for filling, venting, and pressurizing the heating system.
Details on routing flow, return, and hot water connections.
Information on flow rates, water pressure, and pipework for hot water.
Procedure for checking and cleaning the condensate trap.
Instructions for safely connecting the boiler to the mains electricity supply.
Instructions for connecting controls for both heating and hot water.
Pre-checks and preparation before initial boiler start-up.
Step-by-step guide for the initial boiler switch-on and firing.
Procedures for checking combustion, CO2 levels, and flue gas temperature.
Sequential checks to perform before commencing boiler servicing.
Detailed instructions for cleaning internal boiler components.
Procedures for cleaning the combustion head, electrodes, and burner components.
A primary checklist for diagnosing common boiler faults.
Comprehensive procedures for diagnosing central heating and hot water issues.
Specific checklist for issues related to poor hot water performance.
Flowchart for diagnosing faults specific to the Riello RDB burner.
To Next Page
General