EasyManua.ls Logo

Grant VORTEX Pro External Combi 21e - User Manual

Grant VORTEX Pro External Combi 21e
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Grant VORTEX Pro External Combi
Combi 21e, Combi 26e and Combi 36e Condensing Oil Boiler Range
Installation & Servicing Instructions
Part No. DOC 89. Rev 00. May 2012

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Grant VORTEX Pro External Combi 21e and is the answer not in the manual?

Grant VORTEX Pro External Combi 21e Specifications

General IconGeneral
TypeCombi Boiler
ModelVORTEX Pro External Combi 21e
Output21 kW
Fuel TypeOil
MountingExternal
Warranty2 years

Summary

Technical Data

2.1 Boiler Technical Data

Provides comprehensive technical specifications and dimensions for the boiler models.

Oil Storage & Supply System

3.1 Fuel Supply

Requirements and recommendations for fuel storage tank and pipework.

Boiler Installation Information

4.2 Boiler Location

Guidelines for selecting a suitable and safe location for the boiler installation.

4.4 Installing the Boiler

Step-by-step instructions for physically installing the boiler unit.

4.6 Filling and Venting the System

Procedures for filling and removing air from the heating system.

Pipe Connections

5.2 Making the Water Connections

Detailed steps for connecting flow, return, and hot water pipes.

5.3 Domestic Hot Water System

Guidance on setting up and operating the domestic hot water system.

Condensate Disposal

6.1 General Requirements

Requirements for safe and effective disposal of boiler condensate.

Electrical

8.1 Connecting the Power Supply

Instructions for safely connecting the boiler to the mains electrical supply.

8.2 Connecting the Controls - Heating Only

Wiring diagrams for connecting central heating controls only.

Connection of an external remote timer and room thermostat

Wiring guide for connecting a remote timer and room thermostat.

Connection of a Grant Programmable Room Thermostat (RSKIT)

Wiring guide for connecting the Grant RSKIT programmable thermostat.

8.3 Connecting the Controls - Heating and Hot Water

Wiring instructions for connecting controls for both heating and hot water.

Fitting and connection of Grant two-channel wireless Programmable Room Thermostat (RFTKIT)

Installation and wiring guide for the wireless RFTKIT thermostat.

Connection of external remote Programmer (for example, Grant ESKIT).

Wiring guide for connecting a Grant ESKIT two-channel programmer.

Flue System and Air Supply

9.1 Low Level Discharge Flue

Installation requirements and clearances for the standard low level flue.

Commissioning

10.1 Before Switching On

Pre-commissioning checks to ensure the boiler is ready for operation.

10.2 Switching On

Step-by-step procedure for safely switching on and starting the boiler.

10.3 Running the Boiler

Checks and adjustments required during the initial boiler run.

Boiler Servicing

11.1 Checking before Servicing

Essential checks to perform before starting boiler servicing procedures.

11.2 Dismantling Prior to Servicing

Steps for safely dismantling the boiler components for servicing.

11.3 Cleaning the Boiler

Procedures for cleaning the internal parts of the boiler.

Fault Finding

12.1 Initial Checklist - for Installer or Service Engineers

Initial diagnostic steps for troubleshooting common boiler faults.

12.2 Main Fault Finding Procedures

Comprehensive troubleshooting guides for various operational issues.

Health and Safety Information

User Instructions

Related product manuals