Declaration of Conformity
The Manufacturer:
GRANULDISK AB
Jägershillgatan 15
SE-213 75 MALMÖ, Sweden
declares that the following machinery:
The Granuldisk system GD 600
Basic conception
a) is manufactured in conformity with the Svenska Arbetarskyddsstyrelsens Författningssamling AFS1994:48. This law
conforms with the COUNCIL DIRECTIVE of 22 June 1998 concerning harmonisation of member states` legislation for
machinery (the Machinery Directive 98/37/EG), with particular reference to Annex 1 concerning the essential health and
safety requirements relating to the design and construction of the machinery.
b) is besides the provisions under a) manufactured according to the following directives: the EC Low Voltage Directive
73/23/EEC and the EMC Directive 89/336/EEC
c) is manufactured in conformity with the following harmonised standards: EN 60204-1, EN 55014, EN 60335-2-58,
EN 60439-1, EN 418, EN 294, EN 50081-1:1992 and EN 50082-2:1995
d) is manufactured in conformity with the following national standards and technical
specifi cations: ELSÄK-FS 1994:7
e) is manufactured in accordance with EN 1717 and fi tted with a return fl ow protection of type AB with an air gap in
accordance with EN 13077.
Malmö, Sweden 01.03.2005
Signed on behalf of GRANULDISK AB
GRANULDISK AB Jägershillgatan 15
213 75 MALMÖ
Telefon: 040 671 50 60
Fax: 040 21 07 21
...............................................
Per Sandberg
(Managing Director)
To Next Page
Loading...
