Main specifications
The F-Mark automatic feeder is part of the CE6000plus ASF
system.
It allows automatic operations for contour cutting on printed
adhesive sheets or cardboard.
The system is composed by an automatic feeder, a cutting
plotter, a dedicated software with optical detection features and
the exit tray. A mobile lever equipped with vacuum suction cups
lifts the sheets from the inbox tray and inserts them into the
plotter.
The F-Mark feeder is equipped with an internal vacuum pump,
which does not require external air connections.
The system is connected to a computer using a USB cable,
the dedicate software must be installed on a PC running
on Windows OS.
The safety precautions and specification here are referred to
the feeder unit only.
For safety precautions and specifications of the plotter, refer
to the Graphtec CE6000plus manual.
Media size
～ ～
( 300 350mm with CE6000-60)
Length : 210
A3, A4, SRA3, Extended A3
( A3, A4 not usable with CE6000-60 )
～500mm up to 700mm with optional extender
Sheet capacity
About 200 sheets（limit depending on paper thickness)
Max height 35mm
Sheet weight 350g/m2
Power source 100V～240V (Auto switching) 50/60Hz
Power consumption 60W
Weight Feeder 10kg Exit tray 4kx
Feeding system Internal vacuum pump
Feeding time 5 sec
Media separation Air blowers, variable air stream sseparation
Win7 / Win8.x / Win10
Feeder 590(L) x 400(W) x 220(H)mm
System including exit tray:
1220(L) x 680(W) x 270(H from tabletop )mm
Extender to 700mm sheets, stopper for small formats
Temperature: 10～35°Humidity 35～75%
Temperature: 0～40°Humidity 25
～
75%
Tabletop 800(L)x750(W)mm
Compatible OS
Dimensions
USB
Interface
Optional parts
Operating environmen
t
Storage
environment
Installation space
To Next Page
Loading...
