38 cm
plotter width 70~90cm
The system can be configured with a plotter
different for size and maximum cutting area:
The tabletop length to accomodate the system
is 82cm, the width varies:
CE6000plus-40 with a plotter width of 70cm
CE6000plus-60 with a plotter width of 90cm
Allow 5cm of clearance on the right and left side
to accomodate the power cord an the USB cable.
The larger plotter model does not change the
maximum size of the sheet usable on the feeder.
The larger cutting area is usable when the plotter
is used separately by the feeder.
When you choose a location for the CE6000 ASF system note that
the exit tray extends for 35 cm and must be positioned in a
location free of tight passages to avoid hitting it when walking by.
To Next Page
Loading...
