GRAPHTEC GL820 - Page 8

9. START/STOP (USB DRIVE MODE)
Press the START/STOP key to perform start and stop of a data capture while the GL820 is in
the Free Running status. If this key is held down while the power to the GL820 is turned on,
the GL820 goes into USB Drive Mode.
Note: Refer to the User's Manual in the supplied CD-ROM for more information on the setting.
10. Review
Press the REVIEW key to replay captured data. If the GL820 is in the Free Running status,
data files that have already been captured are replayed. If the GL820 is still capturing data,
the data is replayed in a 2-screen format.
Note: A data repar a ote = ng al ed
11. pispLay
Press the DISPLAY key
12. CURSOR (ALARM CLEAR)
Press the CURSOR key to switch between the A and B cursors during a data replay operation.
If the Alarm setting has been specified as "Alarm Hold", press this key to clear the alarm.
The alarm settings are made in the "TRIG" menu.
13. FILE
Press the FILE key to save data to the GL820's internal memory or a USB memory device,
14. navi
Press the NAVI key to display operational descriptions during the Free Running status,
and during data capture and data replay operations.