GRAPHTEC GL820 - Page 9

GL820 Descriptions of the Menu Screens
3.0 mak
display
18.Data ceptureber) Free Runni 1" sec/DIV 7 Bts
p [ MONITOR +
= BL display area
ares
17.Scale upper limit —0. 3641
15,Scale lower limit
14,File name display area
1.Status message display area: Displays the operating status.
2.Time/DIV display area Displays the current time scale.
3,Status mark Displays the status mark
4.Device access lamp Turns red while the internal memory or USM memory is in access.
Tums green when a USB memory device has been inserted.
5.Remote lamp Displays the remote status. (Yellow = Remote status, white = Local status)
& Key lock lamp Displays the key lock status. (Yellow = keys locked, white = nat locked)
7.Clock display Displays the current date and
8.AC/Battery status indicator =: Displays the follow ts to Indicate the operating status of
the AC power and the battery. (see right figure)
This indicator does no
9,Waveform operation display area Displays the mode selected by the SPAN/POSITION/TRACE key.
Displays ti or The Wand A keys can be used to
select the at i d active
11.Quick settings Displays items that can be easily set. The A and ‘W keys used to make
2 Quick settings item active, and the <q and P> k
12.Alarm display area Displays the status of the alarm output. (Red = ala = alarm not generated)
13.Pen display Displays the signal pc ger positions, and alarm ranges for each channel. (see right figure)
14
File
name
display
area
Displays
the
data
ca
operation.
ae
When data is being replayed, the display position and cursor
Information is displayed here.
15.Scale lower limit Displays the the currently active channel.
16.Waveform display area The input signal waveforms are dis
17.Scale upper limit + Displays the upper limit of the scale of the currently active channel.
18.Data capture bar Indicates the remaining capacity of the capture media during data capture.
replayed, the display position and cursor information is displ