Do you have a question about the GRASS VALLEY KAHUNA 6400 and is the answer not in the manual?
Brand | GRASS VALLEY |
---|---|
Model | KAHUNA 6400 |
Category | Switch |
Language | English |
Key safety guidelines for operators and service personnel.
Explanation of safety symbols used throughout the manual.
Hazards that may cause injury or death during operation.
Hazards that could result in equipment damage.
Procedures to prevent damage from electrostatic discharge.
Guidelines for safe handling and operation of laser products.
Mains supply voltage requirements for Kahuna mainframes.
Description of power input connections for mainframes.
List of applicable safety standards and certifications.
List of applicable Electromagnetic Compatibility standards.
Part numbers and descriptions for pre-configured Maverik panels.
Details of available pre-configured panel configurations.
Part numbers and descriptions for various MAV modules.
Specifications for ambient temperature and humidity.
Instructions for assembling MAVRow frames for control surfaces.
Steps for integrating control surfaces into desk environments.
Formulas for determining control surface width and depth.
Formulas for calculating desk cut-out dimensions.
Procedures for securing MAVRow frames within a desk.
Actions to take in case of cooling fan failure.
Instructions for rack mounting the 11RU mainframe.
Instructions for rack mounting the 6RU mainframe.
Connecting the MAV-GUI to other modules and the mainframe.
Diagram and table of rear connectors for the 11RU mainframe.
Detailed table of fins and their connectors for the 11RU.
Details on input and output fins for the 11RU mainframe.
How to install MAV modules into the MAVRow frame.
Step-by-step guide for fitting MAV modules.
Instructions for powering up the 11RU mainframe.
Technical dimensions of the Kahuna 9600 11RU mainframe.
Technical dimensions of the Kahuna 6400 6RU mainframe.
Technical details for the Kahuna Maverik control surface.
Technical specifications for the Kahuna 9600 and 6400 mainframes.
Details on mainframe power supply configurations and redundancy.