Need help?Do you have a question about the GRASS VALLEY KAYAK HD and is the answer not in the manual?
General| Keyers | 4 keyers per M/E |
|---|---|
| Audio Formats Supported | AES/EBU |
| Input Connections | SDI, Composite, Component |
| Output Connections | SDI, Composite, Component |
| Control Interface | Ethernet |
| Processing | 10-bit |
| Mix Effects (M/E) | 2 M/E |
Provides installation, configuration, and service information for the Grass Valley Kayak HD Digital Production Switcher.
Lists the components of the standard Kayak HD documentation set: User Manual, Installation and Service Manual, and Release Notes.
Mentions communication protocols available for developers and software engineers for external interfaces.
Details FCC Emission Control, Canadian EMC Notice of Compliance, and EN55022 Class A Warning for the device.
States Canadian approval for products and power cords used in North America.
Confirms Canadian approval for AC adapters used in North America.
Describes compliance with FCC Part 15 Class B limits for digital devices.
Lists safety and electromagnetic compatibility standards met by the product.
Defines safety terms like WARNING, CAUTION, DANGER used in the manual and on the product.
Identifies conditions or practices that may result in personal injury or loss of life.
Identifies conditions or practices that may result in damage to equipment or property.
Introduces the Kayak HD as an affordable, compact, and flexible digital production switcher.
Lists the different Kayak HD/SD switcher configurations available, including M/E counts and frame sizes.
Details key features like HD format support, digital inputs/outputs, keyers, and M/E count.
Describes optional features such as RAMRecorder, iDPMs, DPM Kurl, Spektra, and DSK/Half M/E.
Lists various control protocols supported by the Kayak HD system for external integration.
Describes the hardware components of the system, including control surfaces and video processor frames.
Details the control panels, including integrated displays and PC-based control options.
Provides overview and dimensions for the 1 M/E control panel.
Details the 1.5 and 2 M/E control panels, including top and rear views.
Shows the 2.5 and 3 M/E control panels, including top and rear views.
Introduces the video processor frames used in the system.
Describes the 4 RU frame, including front and backplane views.
Details the 8 RU frame, including front and backplane views.
Explains the KDD-PSU option for remote power supply.
Illustrates the basic video signal flow designed for operational flexibility.
Guides users to familiarize themselves with tools, specs, and safety requirements before installation.
Instructs to check received parts against the packing list and examine for shipping damage.
Lists the tools necessary for installation, which are not supplied with the product.
Emphasizes reading and following installation safety precautions to prevent injury or damage.
Outlines the recommended steps for installing the Kayak HD system after pre-installation.
Provides guidelines for installing units in rack assemblies, considering temperature and ventilation.
Details the installation and dimensions for the 4 RU video processor frame.
Covers the installation and dimensions for the 8 RU video processor frame.
Lists and describes the connectors found on the Kayak HD frame.
Explains the internal redundant power supply option for the chassis and panel.
Provides instructions for safely removing and replacing the Kayak HD frame door.
Details the process for installing the Kayak HD control panels.
Provides dimensions and installation details for the 1 M/E control panel.
Details dimensions and installation for 1.5 and 2 M/E control panels.
Provides dimensions and installation information for the 3 M/E control panel.
Explains options for mounting control panels on tables or in consoles.
Describes how to secure panels to a mounting surface using threaded holes.
Details the rear and top connectors for the Kayak HD control panels.
Details the KDD-PSU rack-mount power supply option and its connectors.
Provides pin assignments for RS 422/485 and RS 232 ports.
Explains the system for interfacing tally and GPI I/O with external systems.
Describes the GPI input and output assignments and connector details.
Illustrates the typical connections and opto-isolator structure for GPI inputs.
Explains the flexibility and arrangement of GPI/Tally outputs and common connections.
Discusses the system's connections using Ethernet, serial, and USB, including Tally and GPI I/O.
Provides specific cabling diagrams for different Kayak HD control panel models.
Instructs on connecting a PS/2 mouse to the control panel.
Explains the requirement for a LAN and Ethernet switch for system expansion.
Lists the default IP addresses for the video processor frame and control panel.
Describes how video inputs and outputs are configurable for flexible cabling.
Details the video inputs on the Video Processor frame, including numbering and signal types.
Describes the video outputs on the Video Processor frame and their numbering.
Explains the analog reference input pairs for HD and SD video synchronization.
Guides users through setting up video timing parameters for the switcher.
Describes the Genlock menu for status, HD/SD mode switching, and input timing adjustment.
Details how to select the desired HD or SD video standard for the switcher.
Explains how to select the video reference source for synchronization.
Guides on selecting the Segmented Frame (SF) mode for specific video formats.
Provides methods to adjust internal system timing using the Genlock Phase Knob.
Outlines the fundamental steps for configuring the Kayak HD system.
Details how to configure network settings, specifically IP addresses, for devices.
Covers general network settings for the switcher and connected devices.
Explains what an IP address is and how to set it via the control panel menu.
Describes the function of a netmask and how to set it for a device.
Explains an alternative method for configuring network settings using Telnet.
Provides steps to establish a Telnet connection for configuration.
Explains subnet mask purpose and how to set it via Telnet.
Details how to set the Gateway address for network connectivity.
Describes how to install Kayak system software updates.
Guides on updating software via USB flash drive.
Explains the software option licensing system and how to add licenses.
Lists features requiring license activation for operation.
Explains how to organize sources on control panel buttons for personalized layout.
Details the methods for installing licenses onto the Kayak system.
Provides step-by-step instructions for assigning sources to buttons.
Guides on how to rename sources displayed on the control panel.
Explains how to permanently assign sources to AUX bus outputs.
Details how to configure tally settings for AUX buses.
Emphasizes the importance of backing up installation settings for reloading.
Describes saving all settings (environmental data) to USB flash memory.
Explains saving a subset of install data pertaining to control panel settings.
Details saving operational settings like E-MEMs as Applications.
Covers locking the panel to prevent unauthorized changes to settings.
Provides instructions for locking the Kayak HD control panel in DD or Default Mode.
Explains how to unlock the Kayak HD control panel.
Introduces the Install menu system for system setups and advanced functions.
Describes the E-Box setup dialog, presenting various configuration items.
Reports sync regenerator status, switches between HD/SD modes, and adjusts input timing.
Guides on selecting the desired HD or SD video standard for the switcher.
Explains how to select the video reference source for synchronization.
Details basic editor control capabilities and serial port configuration.
Allows programming of GPI inputs for triggering actions on the Kayak HD system.
Describes configuring GPO outputs for trigger control of external devices.
Covers connecting and configuring external machines like VTRs via ports and protocols.
Provides a mechanism to control internal VTR-based components via editors.
Explains how to assign permanent sources to Aux output BNCs.
Details installing AUX Control Panels connected to the Kayak HD.
Guides on installing Under Monitor Displays and setting tally modes.
Covers interfacing with external routing systems like Encore and Jupiter.
Explains assigning Kayak inputs to external router outputs and updating names.
Describes configuring Tally Distributors connected to the Kayak HD.
Provides access to Device Control, Licenses, and Diagnosis menus.
Shows network-connected devices, their IP addresses, and software versions.
Allows changing date/time, IP address, netmask, and device names.
Provides functions for resetting and clearing device configurations, for qualified users.
Covers routine maintenance, software updates, firmware, troubleshooting, and board replacement.
Advises reading the Safety Summary before performing maintenance or troubleshooting.
Lists tools needed for maintenance procedures, referencing the installation section.
Suggests using the FAQ database for answers to common questions.
Provides information for fast and effective troubleshooting of system failures.
Explains how to access the Diagnosis menu to view error messages from devices.
Describes the NetCentral system for monitoring operational status via SNMP agents.
Guides on manually setting the trap destination for status messages.
Advises using Netcheck application to test connection and analyze network stability.
Provides steps to re-connect to the frame if the panel loses its IP address.
Addresses connection loss due to incorrect subnet mask settings.
Describes procedures to check the function of Kayak HD Control Panels.
Tests panel buttons by displaying their logical addresses.
Tests panel LEDs by illuminating them when buttons are pressed.
Tests button groups by switching them on/off and changing color states.
Connects to a frame without Sidepanel software by entering IP address.
Allows selection of different display colors and brightness adjustments.
Addresses issues arising from mismatched software versions between frame and panel.
Explains how to reset the panel CPU by pressing specific buttons simultaneously.
Details actions to take if a fan fails, including replacement recommendations.
Guides on performing field upgrades for the HD RAM Recorder.
Provides steps for replacing the control processor board.
Discusses the factors affecting the internal battery life.
Provides instructions for replacing batteries in the frame and control panel.
Details the procedure for replacing the battery in the Kayak HD frame.
Explains how to replace the battery in the Kayak HD control panel.
Lists additional Field Replaceable Units (FRUs) for Kayak control panels.
Guides on safely removing the top enclosure for panel maintenance.
Describes replacement procedures for various control panel FRUs.
Details replacing the Panel CPU board for 2-M/E and 3-M/E panels.
Provides steps for replacing the Menu Display board.
Guides on replacing the joystick assembly in 2-M/E and 3-M/E panels.
Details replacing the lever arm component in 2-M/E and 3-M/E panels.
Provides instructions for replacing the ribbon cable harness.
Guides on replacing CF cards in 2-M/E and 3-M/E control panels.
Lists FRUs specific to 2-M/E control panels.
Details replacing Keyboard 1 on 2-M/E control panels.
Provides instructions for replacing Keyboard 2 on 2-M/E control panels.
Guides on replacing Keyboard 3 on 2-M/E control panels.
Lists FRUs specific to 3-M/E control panels.
Details replacing the left XPT switchboard on 3-M/E panels.
Provides instructions for replacing the center XPT switchboard on 3-M/E panels.
Guides on replacing the lever transition board on 3-M/E panels.
Details replacing the Key/Delegate switchboard on 3-M/E panels.
Provides steps for replacing a 2-M/E control panel fan.
Guides on replacing a 3-M/E control panel fan.
Covers frame and panel BIOS settings for system configuration.
Details the BIOS setup for the Kayak HD controller processor board.
Provides instructions for configuring the BIOS settings of the control panel.
Provides specifications for Kayak HD systems, including control surfaces and frames.
Lists mechanical specifications like depth, width, height, weight, and rack units.
Details environmental specifications such as storage and operating temperature, and humidity.
Lists Field Replaceable Units (FRUs) for Kayak systems and their RoHS compliant part numbers.
Lists supported GVG100 commands for crosspoint, pushbutton, and transition controls.
Details supported GVG200 commands for transitions and crosspoint operations.
Introduces the ESAM protocol for connecting to audio mixers like Yamaha DM-1000.
Lists supported commands for the ESAM-2 protocol, including All Stop and From Source.
Guides on accomplishing ESAM installation and configuration using the Sidepanel menu.
To Next Page
