23
Card Edge LEDs
The LEDs on the edge of the module indicate its operating status.
Card Edge LEDs
Front Edge Description
STATUS PB=IDENT STATUS
Green = PTP-LOCK OK
Off = PTP-LOCK Fail
BOARD CPU BOARD
Green flashing= PTP-SYNC OK
Off = PTP-SYNC Fail
PTP REF REF
Green flashing = Watchdog timer OK
8 16 1 - 16 = Input flow status
Green = UHD
Green = 3G
Green = HD
Yellow = SD
Off = Not connected
For 12G quad-link:
Green = Active input flow
Red = Inactive input flow
Yellow = TPG is active
7 15
6 14
5 13
4 12
3 11
2 10
1 9
SFP 2 SFP 1 - 2 = Status/lane.
Red = Fault (3V3 regulator failure)
Green = 10G SFP OK
If flashing, link is down.
SFP 1
PB=RESET
To Next Page
Loading...
