Parts List - Elektro-UHU
Part Description No. off Material Dimensions in
mm
1 Fuselage 1 SOLIDPOR Ready made
2 Carbon fibre tube 1 CFRP 6 / 4 Ø x 450
3 Bush 2 ABS Ready made
4 Dowel support 1 ABS Ready made
5 Dowel 1 ABS Ready made
6 Canopy 1 SOLIDPOR Ready made
7 Retaining clip 1 ABS Ready made
8 Lug 1 ABS Ready made
9 Snake outer sleeve, rudder 1 Nylon 1.9 / 0.9 Ø x 620
10 Snake outer sleeve, elevator 1 Nylon 1.9 / 0.9 Ø x 655
11 Fin 1 SOLIDPOR Ready made
12 Tailplane 1 SOLIDPOR Ready made
13 Swivel pushrod connector 2 Steel M2
14 Self-locking nut 2 Nylon M2
15 Grubscrew 2 Steel M3 x 3
16 Elevator pushrod 2 Steel 0.5 Ø x 700
17 Rudder pushrod 2 Steel 0.5 Ø x 675
18 Control surface horn 2 ABS Ready made
19 Threaded insert 2 Nylon M4 x 10
20 Countersunk screw 2 Nylon M4 x 35
21 Wing 1 SOLIDPOR Ready made
22 Carbon fibre tube 1 CFRP 6 / 4 Ø x 390
23 Undercarriage support 2 ABS Ready made
24 Undercarriage unit 2 Steel Ready made
25 Self-tapping screw 2 Steel 2.2 Ø x 6.5
26 Foam rubber wheel 2 Plastic 20 Ø x 6
27 Wheel box 1 ABS Ready made
28 Wheel support 1 ABS Ready made
29 Wheel axle 1 ABS Ready made
30 Main wheel 1 Plastic 40 Ø x 15
31 Undercarriage decal 1 Self-adhesive film Oversize
32 Undercarriage decal 1 Self-adhesive film Oversize
33 Decal 30 Self-adhesive film Oversize
34 UHU por 1 Adhesive 5 g
The kit also includes two spare ABS control surface horns.
Replacement part (not included)
Decal sheet 9400.14
To Next Page
Loading...
