Need help?Do you have a question about the GRAUPNER GENIUS PRO 160R for W-Lan and is the answer not in the manual?
General| Category | Controller |
|---|---|
| Channels | 16 |
| Frequency | 2.4 GHz |
| Telemetry | Yes |
| Type | Transmitter |
| Modulation | FHSS |
| Battery | LiPo |
| Display | TFT |
Outlines crucial safety instructions for product usage and handling.
Diagram illustrating wiring for S3078 and S3086 models.
Diagram illustrating wiring for S3084 and S3085 models.
Details on correctly connecting the battery plug for secure operation.
Instructions for mounting the speed controller and ensuring adequate cooling.
Guidance on final installation steps and initial setup in the model.
Explains how to connect the motor, including sensor wiring and direction.
Lists LED error codes and their meanings for troubleshooting.
Adjusting power curve, boost timing (Max+TB, Min-rpm) for performance tuning.
Setting maximum RPM limit for boost and throttle limit mode.
Indicators in the telemetry menu for various warning conditions.
Configuring warning thresholds for battery voltage, temperature, and current.
Procedure for saving adjusted settings in the speed controller.
Steps needed before starting the firmware update process.
To Next Page
