Need help?Do you have a question about the GRAUPNER GM Genius Pro Series and is the answer not in the manual?
General| Frequency | 2.4 GHz |
|---|---|
| Modulation | FHSS |
| Display | LCD |
| Model Memory | 20 |
| Battery | LiPo |
Provides manufacturer contact details and support information.
Specifies the intended application of the speed controller in RC car models.
Lists all items included in the product packaging.
Explains the meaning of warning and information symbols used in the manual.
Crucial safety instructions for operating the product and related models.
Guides on mounting the speed controller and initial setup in the model.
Details how to connect the brushless motor to the speed controller.
Explains connecting the receiver for control signals and power.
Explains how advanced timing affects motor performance and battery life.
Details acceleration and start power settings for motor behavior.
Covers power curve for throttle response and reverse gear modes.
Explains LED error codes and status indicators for operational feedback.
Explains how to interpret ESC data presented in the telemetry menu.
Settings for motor type, battery type, and low-voltage cut-off.
Configuration of power curve, boost timing, and RPM limits.
Adjusting boost limits, turbo delay, slopes, and acceleration.
Configuring start power, current limit, and reverse function modes.
Setting neutral width, motor direction, and various brake functions.
Adjusting brake/motor frequencies and drag frequency.
Settings for motor poles, gear ratio, BEC voltage, and temperature cutoffs.
Configuring warning thresholds for battery voltage, temperatures, and current.
Procedures for saving programmed settings and handling restart options.
Setting warning parameters for voltage, ESC temperature, and motor temperature.
Configuring warning thresholds for maximum current draw.
Explains the meaning of various data fields displayed in the telemetry screen.
Describes how the RPM indicator shows motor speed based on gear ratio and motor poles.
Steps for preparing a PC and software for firmware updates.
Instructions for connecting the controller and initiating the firmware update.
Details connecting the speed controller and adapter cable to the PC.
Explains the two methods for transferring firmware to the controller.
Guidance on proper disposal of the product and batteries.
Recommendations for protecting the product from dust, dirt, and moisture.
Details the warranty period, terms, and exclusions.
To Next Page
