GRAUPNER GENIUS PRO 180R for W-Lan User Manual

EN
No. S3084 (60R) No. S3086 (120R) No. S3078 (160R) No. S3085 (180R)
GM Genius Pro
Manual
Copyright © Graupner/SJ GmbH
Speed controller with telemetry and W-LAN module (optional)

GRAUPNER GENIUS PRO 180R for W-Lan Specifications

General

Telemetry	yes
Connectivity	W-Lan
Battery	LiPo
Voltage	7.4V
BEC	no

Summary

Intended Use and Limitations

Technical Specifications Overview

Understanding Symbols and Warning Indicators

General Safety Guidelines and Precautions

Wiring Diagram for S3078/S3086 Models

Wiring Diagrams for S3084/S3085 Models

Speed Controller Installation Guidelines

Model Installation and Initial Setup

BEC Power Management and Safety

Critical instructions on managing the BEC power supply and potential risks.

Motor Connection and Wiring

Receiver Connection for Control and BEC

Calibrating the Throttle Range

Configurable Speed Controller Parameters

Advanced Features and Functions

Troubleshooting LED Error Codes

Viewing ESC Data via Telemetry

Configuring Settings via HoTT Transmitter

Displaying Settings on Transmitter

Visual representation of how settings are displayed for different motor types.

Motor and Battery Type Configuration

Setting Low-Voltage Cut-off Protection

Power Curve and Boost Timing Adjustment

Boost RPM Limit and Throttle Limits

Turbo Delay, Slope, and Acceleration Control

Start Power and Starting Current Control

Understanding Reverse Modes and Delay

Motor Direction and Brake Configuration

Brake and Motor Frequency Settings

Motor Poles, Gear Ratio, and Tire Size Setup

BEC Voltage and Temperature Cut-off Settings

Connecting the W-Lan Module for Telemetry

Setting Telemetry Alarm Thresholds

Saving Speed Controller Configurations

Procedure for saving configured settings to the speed controller.

Interpreting Graphical Telemetry Data

Guide to Speed Controller Firmware Updates

Firmware File Transfer Methods