GRAUPNER GM Genius Pro Series - Settable Warning Messages; Voltage, ESC, and Motor Temp Warnings; Max Current Warnings

24 / 32
S3084_S3086_S3078_S3085_MP_V1
Settable warning messages
Acustic and visual warning messages
[ESC] WARNING <>
>Set warning : page 1
E.S.C save? No
Factory set ? No
Ver:P 2.080
[ESC] VOLTAGE <>
>set warning : page 2
Voltage : 3.0V
Warning Time : off
Repeat Time :ALWAYS
Signal Tone : P
Min-volt : 7.5V
[ESC] E.S.C.TEMP. <>
>set warning : page 3
Temperature : 60
°
C
Warning Time : off
Repeat Time : ALWAYS
Signal Tone : H
E
SC
. T
e
m
p
. : 2
9
°
C
[ESC] MAX.CURRENT <>
>set warning : page 5
maximum cur : 100A
Warning Time : off
Repeat Time :ALWAYS
Signal Tone : W
MAX.CURR : 5.3A
[ESC] MOTOR TEMP. <>
>set warning : page 4
Temperature : 60
°
C
Warning Time : off
Repeat Time :ALWAYS
Signal Tone : I
MOTOR Temp. : 29
°
C
[ESC] WARNING <>
>set warning : page 3
Temperature : 60
°
C
Warning Time : off
Repeat Time :ALWAYS
Signal Tone : H
ESC. Temp. : 29
°
C
Controller settings can be modified
directly through the transmitter.
[ESC] *SENSORLESS <>
User setup: page 1
>MODEL: HYBRID
E.S.C save? Yes
Factory set? Yes
E.S.C RESTART... 3
Ver:P 2.080
E.S.C] *SENSORLESS >
User setup : page 1
>MODEL :
HYBRID
E.S.C save? No
Factory set? No
Ver:P 1.000
E.S.C] *SENSOR >
User setup : page 1
>MODEL : SENSOR
E.S.C save? No
Factory set? No
Ver:P 1.000