GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
We reserve the right to introduce modifications. Not liable for printing errors!
11/2011
8
In the next step, use your fingers to feel for the slot for the landing gear wire, and
melt it free with a hot soldering iron.
Now place the leg of the undercarriage into the slot, to mark the attachment points of
the two tabs and the wheel fairing support block.
Drill pilot-holes in the wings for the retaining screws; then screw the tabs and the
wheel fairing support block to the wing.
To Next Page
Loading...
