What to do if GRAUPNER Battery Charger does not recognize the battery?
If your GRAUPNER Battery Charger isn't recognizing the battery, first, ensure the battery is correctly connected to both the charge port and the balancer. Also, check the battery for any defective cells.
Why is GRAUPNER Battery Charger battery not fully charged after maximum charging time?
If your GRAUPNER Battery Charger isn't fully charging the battery after the maximum charging time, try running a full cycle charge process to improve the capacity, especially if the battery has been stored for a long time or is heavily used. Also, verify that the minimum discharge voltage is correctly set within the charge cycle.
What to do if battery voltage is too low after charge with GRAUPNER Battery Charger?
If the battery voltage is too low after charging with your GRAUPNER Battery Charger, ensure that the charge settings are correct. Check the set delta peak value if you are charging NiCd or NiMH batteries. Examine the connecting cable of the battery as well.
What to do if discharge mode is not retrieved on GRAUPNER Battery Charger?
If the discharge mode is not being retrieved on your GRAUPNER Battery Charger, verify that the selected cell voltage matches the battery's specifications. Also, check the battery for defective cells.
How to fix a dark display on GRAUPNER POLARON EX-1400?
If the display remains dark when connecting your GRAUPNER Battery Charger, ensure the external power supply meets the charger's requirements and that all cables are properly connected. If the issue continues, you should contact the Service.
General| Brand | GRAUPNER |
|---|---|
| Model | POLARON EX-1400 |
| Category | Battery Charger |
| Language | English |
To Next Page
