What to do if GRAUPNER Battery Charger does not recognize the battery?
If your GRAUPNER Battery Charger isn't recognizing the battery, first, ensure the battery is correctly connected to both the charge port and the balancer. Also, check the battery for any defective cells.
Why is GRAUPNER Battery Charger battery not fully charged after maximum charging time?
If your GRAUPNER Battery Charger isn't fully charging the battery after the maximum charging time, try running a full cycle charge process to improve the capacity, especially if the battery has been stored for a long time or is heavily used. Also, verify that the minimum discharge voltage is correctly set within the charge cycle.
What to do if battery voltage is too low after charge with GRAUPNER Battery Charger?
If the battery voltage is too low after charging with your GRAUPNER Battery Charger, ensure that the charge settings are correct. Check the set delta peak value if you are charging NiCd or NiMH batteries. Examine the connecting cable of the battery as well.
What to do if discharge mode is not retrieved on GRAUPNER Battery Charger?
If the discharge mode is not being retrieved on your GRAUPNER Battery Charger, verify that the selected cell voltage matches the battery's specifications. Also, check the battery for defective cells.
How to fix a dark display on GRAUPNER POLARON EX-1400?
If the display remains dark when connecting your GRAUPNER Battery Charger, ensure the external power supply meets the charger's requirements and that all cables are properly connected. If the issue continues, you should contact the Service.
General| Brand | GRAUPNER |
|---|---|
| Model | POLARON EX-1400 |
| Category | Battery Charger |
| Language | English |
Information on battery capacity and its impact on usage time.
Instructions for the proper disposal of used batteries.
Details the scope and limitations of the product warranty.
General specifications for the charger and its power requirements.
Information on the ports and connectors available on the charger.
Specific technical details for Ni-Cd and Ni-MH battery charging.
Specific technical details for Li-ion, LiPo, and LiFe battery charging.
Specific technical details for lead-acid battery charging.
Description of the front view of the charger and its components.
Description of the back view of the charger and its components.
Function to store and manage battery profiles and settings.
Menu for configuring and initiating battery charging processes.
Menu for configuring and initiating battery discharging processes.
Access to specialized functions like servo testing and motor setup.
Menu for customizing charger parameters and system settings.
Buttons for menu navigation, value adjustment, and confirmation.
Buttons for copying settings or controlling power.
Specific adjustable parameters for NiCd and NiMH battery charging.
Specific adjustable parameters for Lithium battery charging.
Specific adjustable parameters for Lead batteries charging.
Automatic charge mode that determines current based on battery resistance.
Linear charge mode with constant current and resistance checks.
Normal charge mode with review for delta peak detection.
Constant Current/Constant Voltage mode for Lithium and Lead batteries.
Fast charge mode for Lithium batteries using constant voltage.
Linked charge mode for simultaneous charging of identical Lithium batteries.
Customizing discharge settings for various battery types.
Specific adjustable parameters for discharging these battery types.
Automatic discharge mode based on cell count.
Linear discharge mode with constant current for a set duration.
Normal discharge mode with constant current.
Linked discharge mode for simultaneous charging of identical Lithium batteries.
Customizing parameters for cycle programs.
Displays power supply input voltage and current data.
Displays battery output voltage, temperature, and resistance data.
Servo test menu for testing servos and brushless motors.
Motor setup and test functions for brushed motors.
Control programs for battery and tire warmers.
Programming Electronic Speed Controllers via telemetry.
Detailed description of the servo test function's display.
Procedure for the motor break-in process.
Settings and operation of the battery warmer function.
Setting up user-specific preferences like sounds and display brightness.
Configuring power input and output limits for the charger.
Resetting the charger to its original factory default settings.
Calibrating the touchscreen for accurate input.
Updating firmware or system resources.
Testing the BLC port, likely for diagnostic purposes.
To Next Page
