GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
We reserve the right to introduce modifications. Not liable for printing errors! 12/2011
Made in
Vietnam
6
As seen in the photos, unstick the slots for the GRP control horns, put a dab of glue
into the slot, and push the control horn in until it stops.
Wipe off any excess glue.
Fasten the landing gear to the wings using the hinges.
When doing so, observe the marks on the wings. Make sure that the hinges are
screwed on at a right angle to the trailing edge.
To Next Page
Loading...
