GRAUPNER Twister - TWISTER Wheel and Fuselage Preparation; Wheel Assembly and Securing; Fuselage Bulkhead Marking

GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
We reserve the right to introduce modifications. Not liable for printing errors! 12/2011
Made in Vietnam
8
Now the wheels can be attached using the wheel axles.
To do so, push the wheels and adjustment rings onto the axle. Secure the grub
screws using UHU schraubensicher thread-lock fluid.
Adjust the transparent covers of the wing tip lights and use transparent adhesive film
to attach them to the wings.
The fuselage and control surfaces
Depending on the type of propulsion system installed, the corresponding drill holes
are transferred from the template to the bulkhead. To do so, tape the template to the
fuselage.