Gravely 992217 User Manual

44 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Pro-Master 252 / 260 / 272

04273700A 1/11

Printed in USA

US Patent 6,301,864

Models

992210 – 260M

992212 – 252M

992213 – 272H

992215 – 260H

992216 – 272H

992217 – 260H

ENGLISH

FRANÇAIS

Owner/Operator Manual

Manuel Du Propriétaire/Utilisateur

Gasoline containing up to 10% ethanol (E10) or up to 10% MTBE (methyl tertiary butyl

ether) is acceptable for use in this machine.

The use of any gasoline exceeding 10% ethanol (E10) or 10% MTBE will void the product

warranty.

Il est possible d’utiliser de l’essence contenant jusqu’à 10% d’éthanol (E10) ou 10% de

MTBE (éther méthyl-tertiobutylique) sur cette machine.

L’utilisation d’une essence contenant plus de 10% d’éthanol (E10) ou de 10% de MTBE

annulent la garantie

Questions and Answers:

J
Jason JenkinsAug 9, 2025
What to do if my Gravely 992217 cranks but does not start?
- M
  myersstephanieAug 9, 2025
  If your Gravely Lawn Mower engine cranks but doesn't start, there are several potential causes. First, check if the fuel tank is empty and fill it, being careful not to overfill. A faulty spark plug could also be the culprit, so replace it. Additionally, inspect the air cleaner and fuel filter for dirt or blockages, and clean or replace them as needed. If the issue persists, the fuel pump or engine itself may be faulty, in which case you should consult your Engine Manual or a Gravely Dealer.
C
Connie MartinezAug 14, 2025
What to do if PTO or mower blades do not engage or shuts off on my Gravely 992217 Lawn Mower?
- J
  Jordan WilliamsAug 15, 2025
  If the PTO or mower blades on your Gravely Lawn Mower do not engage or shut off, it could be due to the operator presence switch not being depressed. Ensure you are sitting on the seat to depress the switch. If the problem persists, the PTO switch may be faulty, and you should consult your Gravely Dealer.
W
William WattsAug 21, 2025
Why my Gravely 992217 Lawn Mower unit does not drive?
- J
  Joanna PorterAug 21, 2025
  If your Gravely Lawn Mower unit does not drive, it could be due to a few reasons. Make sure the parking brake is disengaged. Also, check that the transmission bypass valves are closed. If the hydraulic oil level is low, add more. If none of these solutions work, there might be a problem with the hydraulic drive system, and you should consult your Gravely Dealer.
S
sara69Aug 27, 2025
Why does my Gravely 992217 engine not crank?
- C
  Cheryl CrosbyAug 27, 2025
  If your Gravely Lawn Mower engine doesn't crank, it could be due to several reasons. First, ensure that the PTO is disengaged and the parking brake is engaged. Check the battery cables for looseness or corrosion, and clean and tighten them if necessary. The battery might be discharged, so ensure that you charge it. If none of these steps work, the starter may be faulty, and it is best to consult your Gravely Dealer.
K
Kimberly StoneSep 2, 2025
Why does my Gravely 992217 engine continue to run when ignition key is off?
- B
  bruce02Sep 2, 2025
  If the engine continues to run when the ignition key is in the off position on your Gravely Lawn Mower, it could be due to an ignition switch failure. In this case, you should replace the ignition switch and consult your Gravely Dealer. Another possible cause is a disconnected ignition ground wire, so ensure the ground wire is connected to a clean metal surface.

Gravely 992217 Specifications

General

Brand	Gravely
Model	992217
Category	Lawn Mower
Language	English

Summary

Introduction and Manual Guidance

Understanding Your Manual

Safety Guidelines and Precautions

Safety Alert System and Signal Words

Explains hazard symbols and words (DANGER, WARNING, CAUTION) for hazard identification.

Safe Operating Practices and Laws

Safety Decals and Locations

Decal Identification and Placement

Illustrates the placement and meaning of safety decals on the unit.

Hazard Identification and Warnings

Specific Hazard Warnings

Details specific risks like pinch points, hot surfaces, and general warnings.

Slope Operation and Rollover Safety

Slope Operation and ROPS Guidance

Personal Safety and Operational Rules

Personal Protective Measures

Advanced Safety Procedures

Slope, ROPS, Transport, and Fuel Safety

Specific rules for slopes, ROPS, transport, and fuel handling safety.

Controls and Features Overview

Control Panel Layout and Identification

Operation Procedures

Ignition, Choke, and Throttle Controls

How to use ignition, choke, and throttle for starting and speed control.

PTO Engagement and Safety Interlocks

Engaging PTO and testing safety interlock systems before operation.

Mower Deck and Seat Operation

Steering Levers, Parking Brake, and Seat Adjustments

Using steering, brake, and adjusting seat position for safe operation.

Mower Lift Pedal and Height Settings

Unit Preparation and Fueling

Fuel Tank Filling Procedure

Starting, Stopping, and Mowing

Engine Starting and Shutting Off

Procedures for starting gas and diesel engines and shutting them down.

Mower Operation and Blade Engagement

Steps for safely starting the engine and engaging the mower blades.

Maintenance Schedule - Each Use

Pre-Use Checks and Safety System Testing

Checks to perform before each use, including safety interlocks and tires.

Maintenance Schedule - Periodic Tasks

Periodic Maintenance Tasks

Battery Maintenance Procedures

Battery Removal, Cleaning, and Charging

Mower Blade and Roller Service

Mower Blade Removal, Installation, and Sharpening

Steps for removing, installing, and sharpening mower blades.

Mower Deck Removal and Leveling

Mower Deck Removal and Installation

Leveling the Mower Deck

Steps to ensure the mower deck is properly leveled for even cutting.

Mower Deck Leveling and Belt Access

Blade Level and Pitch Adjustment

Adjusting blade height and pitch for optimal cutting quality.

PTO Belt Service Procedures

PTO Belt Removal and Installation

Detailed steps for removing and installing the PTO belt.

Drive and Transmission Belt Service

Mower Drive Belt Procedures

Transmission Belt Procedures

Transmission Belt Maintenance

Transmission Belt Removal and Installation

Steering Control Adjustment

Neutral Adjustment for Steering Levers

Adjusting steering levers to align correctly and prevent creeping.

Steering Control Alignment

Eliminating Excessive Unit Creeping

Procedure to adjust tie-rods to correct unit creeping.

Adjusting Unit to Track Straight

Steps to adjust limiter bolts for proper tracking alignment.

Hydraulic and Cooling System Service

Checking Hydraulic Oil Level

Changing Hydraulic Oil and Filter

Coolant Change and Clutch Adjustment

Clutch Adjustment Procedure

How to check and adjust the clutch air gap for proper engagement.

Troubleshooting Engine Problems

Engine Cranks But Does Not Start

Common causes and corrections for engine starting problems.

Warning Lights Troubleshooting

Troubleshooting tips for oil pressure and fuel/water separator warning lights.

Troubleshooting Unit Operation Issues

Engine Not Shutting Off or PTO Issues

Solutions for engine not shutting off and PTO engagement problems.

Unit Not Driving or Hydraulic Issues

Technical Specifications - Models 992210/992217

Model 992210/992217 Specifications

Technical Specifications - Models 992212/992213

Model 992212/992213 Specifications

Technical Specifications - Models 992215/992216

Model 992215/992216 Specifications

Commercial Warranty Information

Two-Year Limited Lawn and Garden Warranty

Related product manuals

Preview: Gravely 992224

Preview: pro-turn 460 diesel 992236

pro-turn 460 diesel 992236

Preview: Gravely 992184

Preview: Gravely 992078 21HP-148Z

Gravely 992078 21HP-148Z

Gravely 992079 23HP-152Z

Preview: Gravely 991091 ZT HD60

Gravely 991091 ZT HD60

Preview: Gravely Pro-Turn 991200

Gravely Pro-Turn 991200