To Next PageTo Next PageWhat to do if my Gravely Pro-Turn Z 60 engine runs rough?
If the engine of your Gravely Lawn Mower runs rough, the choke control knob might be in the 'on' position. If so, move the knob to the 'off' position. Additionally, a plugged air filter cartridge could be the cause, so clean or replace it. If neither of these solutions resolves the issue, the engine itself may be faulty, and you should contact your Gravely dealer.
What to do if my Gravely Pro-Turn Z 60 does not drive?
If your Gravely Lawn Mower does not drive, one potential cause is that the transaxles are bypassed. If this is the case, engage the levers. It's also possible that the transaxle drive belt is faulty, or that the transaxles themselves are faulty, which would require contacting your Gravely dealer.
What to do if my Gravely Pro-Turn Z 60 Lawn Mower won't drive?
If your Gravely Lawn Mower does not drive, make sure that the transaxles are engaged by their levers. If the levers are engaged, but the unit still doesn't drive, the transaxle drive belt may be faulty, or the transaxles themselves may be faulty, in which case you should contact your Gravely dealer.
How to fix a Gravely Lawn Mower that does not drive straight?
If your Gravely Lawn Mower does not drive straight, it could be due to incorrect tire pressure, so check the tire pressure. Also, the steering levers may need adjustment.
Why is my Gravely Pro-Turn Z 60 Lawn Mower's cutting quality so poor?
If your Gravely Lawn Mower exhibits poor cutting quality, several factors could be responsible. First, the mower blades might not be level, or the mower deck pitch could be incorrect. It's also possible that the mower blades are dull or faulty, requiring sharpening or replacement. Another factor could be mowing speed is too fast, so try driving slower when cutting grass. Also, belt tension or condition might be poor, requiring replacement of mower belts. Finally, the cutting height might be too low, so avoid setting the height of cut too low, and for very tall grass, mow twice.
What to do if the PTO malfunctions on my Gravely Pro-Turn Z 60 Lawn Mower?
If the PTO malfunctions on your Gravely Lawn Mower, it could be due to a few reasons. The operator presence switch might not be engaged; make sure to activate it by sitting on the operator seat. It's also possible that the operator presence switch itself is faulty. Another cause could be a faulty PTO belt, which would need replacement. In some cases, the PTO switch, wiring, connectors, or clutch might be faulty, which would require contacting your Gravely dealer.
What to do if blades do not stop within 5 seconds on Gravely Pro-Turn Z 60 Lawn Mower?
If the blades on your Gravely Lawn Mower do not stop within 5 seconds, it indicates that the clutch brake plates are worn. Try reversing the clutch brake plates. If they have already been reversed, replace the clutch.
Why does my Gravely Pro-Turn Z 60 Lawn Mower engine overheat?
If your Gravely Lawn Mower is overheating, it might be due to a low engine oil level, so add engine oil. Another potential cause is plugged cooling fins, so clean the engine. If the problem persists, the engine itself may be faulty, and you should contact your Gravely dealer.
Why is the cutting quality poor on my Gravely Pro-Turn Z 60 Lawn Mower?
If your Gravely Lawn Mower exhibits poor cutting quality, several factors could be responsible. Ensure the mower blades are level and the mower deck pitch is correct. Dull or faulty mower blades can also cause this issue, so sharpen or replace them. If you're mowing too fast, try slowing down. Poor belt tension or condition can also affect cutting quality, so replace the mower belts if needed. Avoid setting the cutting height too low; for very tall grass, consider mowing twice.
Why doesn't my Gravely Lawn Mower drive straight?
If your Gravely Lawn Mower does not drive straight, it could be due to incorrect tire pressure, so check the tire pressure. Another possible cause is that the steering levers need adjustment.
Diagram and list of all controls, levers, and features on the unit.
Description of ignition, throttle, choke, and PTO controls for operation.
Procedures for starting the engine and safely operating the mower.
How to stop the engine and move the unit manually.
Detailed steps for checking, changing, and purging hydraulic system components.
How to adjust the operator seat and steering levers for comfort.
Diagram and list of all controls, levers, and features on the unit.
Description of ignition, throttle, choke, and PTO controls for operation.
Procedures for starting the engine and safely operating the mower.
How to stop the engine and move the unit manually.
Detailed steps for checking, changing, and purging hydraulic system components.
How to adjust the operator seat and steering levers for comfort.
General| Brand | Gravely |
|---|---|
| Model | Pro-Turn Z 60 |
| Category | Lawn Mower |
| Language | English |
