To Next PageTo Next Page
Need help?Do you have a question about the Gravely Pro-Turn 52 and is the answer not in the manual?
General| Engine Manufacturer | Kawasaki |
|---|---|
| Engine Model | FX691V |
| Horsepower | 22 hp |
| Cutting Width | 52 inches |
| Transmission | Hydro-Gear ZT-3400 |
| Engine Displacement | 726 cc |
| Spindle Material | Aluminum |
| Transmission Type | Hydrostatic |
| Blade Tip Speed | 18, 500 fpm |
| Deck Type | Fabricated |
| Turning Radius | Zero-turn |
| Wheel Size - Front | 13 x 6.5 inches |
| Engine Type | V-Twin |
| Cutting Height | 1.5 to 5 inches |
| Deck Material | 7-gauge steel |
| Warranty | 5-year / 500-hour (limited) |
Emphasizes the need for training for safe and proper operation.
Explains signal words like Danger, Warning, Caution used in manual.
Describes safety decals on the machine for visual reminders of safety information.
Warnings about rotating parts, blades, discharge, and guards.
Warnings about slopes, service procedures, and bystanders.
Warnings on loss of traction, bystander safety, and general danger signals.
Precautions regarding hot surfaces and rotating components.
Information on ROPS maintenance and usage for safety.
Warnings about machine rollover, following safety rules, and operator responsibilities.
Guidelines on operator age restrictions and ensuring children's safety.
Steps to perform before starting the unit for safe operation.
Specific safety guidelines and procedures for operating on slopes.
Inspection and care of the ROPS and seat belt for safety.
Detailed steps for assembling the unit, including tires, seat, and levers.
Checking safety interlock system and lubricating unit fittings.
Explains steering lever operation and testing the safety interlock system.
Describes engagement of PTO for blades and operation of the parking brake.
Repeats ROPS information regarding inspection and care.
Detailed steps for starting, shutting off, and emergency stopping the unit.
Tasks to perform before or after each use, like checking interlocks and tires.
Steps for adding fluid and changing fluid and filter.
Procedures for removing, replacing, sharpening, and balancing mower blades.
Detailed procedure for replacing the mower belts.
Procedures for checking and adjusting blade level and pitch.
Details warranty periods for consumer and commercial use across product groups.
