EasyManua.ls Logo

Gravely ZT 1334 - User Manual

Gravely ZT 1334
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Owner/Operator Manual
Manuel Du Propriétaire/Utilisateur
Models
915130 – 1334
ZT
03824400A 2/09
Printed in USA
ENGLISH
FRANÇAIS

Questions and Answers

  • L
    leestephanieAug 7, 2025
    Why won't my Gravely Lawn Mower engine crank or start?
    • C
      Christina PopeAug 7, 2025
      There are several reasons why your Gravely Lawn Mower engine might not crank or start: * The safety interlock system may not be engaged or could be faulty. Check the safety interlock system. * The fuel tank might be empty. Refill the fuel tank. * The battery may be discharged. Charge the battery. * There might be a poor connection between the battery and battery cables. Tighten the battery cables and/or clean the battery and battery cables. * Spark plug wires might be loose or spark plugs faulty. Connect the spark plug wires or replace the spark plugs. * There may be a faulty electrical system or engine.
  • M
    Matthew MooreAug 11, 2025
    What to do if my Gravely ZT 1334 PTO or mower blades do not engage or shut off?
    • A
      Alan AdamsAug 11, 2025
      If the PTO or mower blades on your Gravely Lawn Mower do not engage or shut off, consider the following: * Ensure the operator presence switch is depressed by sitting on the seat. * The clutch actuator might be loose or disconnected. Connect the wiring to the PTO actuator, and properly connect the PTO actuator cable to the deck cable anchor or to the deck idler arm. * A faulty PTO belt could be the issue. Replace the PTO belt. * The operator presence switch, PTO switch, wires, connectors, or clutch might be faulty.
  • M
    maynardalisonAug 15, 2025
    What to do if my Gravely ZT 1334 unit does not move with engine running when using steering levers?
    • S
      Sarah DixonAug 16, 2025
      If your Gravely Lawn Mower unit does not move with the engine running when using the steering levers: * The transmission bypass lever may be engaged. Disengage the transmission bypass lever. * The hydrostatic belt could be faulty. Replace the hydrostatic belt. * The transmission might be faulty.
  • A
    Andrea EverettAug 19, 2025
    How to improve the cutting quality of my Gravely ZT 1334 Lawn Mower?
    • D
      David WillisAug 20, 2025
      To improve the cutting quality of your Gravely Lawn Mower: * Ensure the mower deck is level and the mower pitch is correct. Level and adjust the pitch of the mower deck. * Check if the mower blades are dull or faulty. Sharpen or replace the mower blades.
  • M
    Marie DavisAug 25, 2025
    Why does my Gravely ZT 1334 engine run rough?
    • B
      Bethany HeathAug 25, 2025
      If your Gravely Lawn Mower engine is running rough, it could be due to: * The choke being engaged. Disengage the choke. * The air filter cartridge being plugged. Clean or replace the air filter cartridge. * A faulty engine.
  • J
    Jordan HayesAug 28, 2025
    What to do if my Gravely ZT 1334 engine overheats?
    • D
      david91Aug 28, 2025
      If your Gravely Lawn Mower engine is overheating: * Check if the engine oil level is low and add engine oil if needed. * The cooling system may be plugged. Clean the cooling system. * The engine might be faulty.
  • M
    Michael MillerSep 2, 2025
    Why does my Gravely ZT 1334 unit not travel in a straight line?
    • A
      adam33Sep 2, 2025
      If your Gravely Lawn Mower unit does not travel in a straight line: * Check and correct the tire pressure. * The steering levers may need adjustment. Adjust the steering levers. * The hydrostatic transmission and/or linkage may need adjustment.

Gravely ZT 1334 Specifications

General IconGeneral
BrandGravely
ModelZT 1334
CategoryLawn Mower
LanguageEnglish

Related product manuals