EasyManua.ls Logo

Gravely ZT X - User Manual

Gravely ZT X
40 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
05278700B • 2/21
Printed in USA
ENGLISH
FRANÇAIS
E10
ZT X
Operator’s Manual
Manuel du Utilisateur
ZT XL
™
™
Models
915255 – ZT X 42
(SN 000101 +)
915256 – ZT X 52
(SN 000101 +)
915257 – ZT X 52
(SN 000101 +)
915258 – ZT XL 52
(SN 000101 +)
915259 – ZT XL 42
(SN 000101 +)
915260 – ZT XL 60
(SN 000101 +)
915261 – ZT XL 48
(SN 000101 +)
915262 – ZT XL 42
(SN 000101 +)
915263 – ZT XL 52
(SN 000101 +)
915264 – ZT XL 60
(SN 000101 +)
915274 – ZT X 60
(SN 000101 +)
915278 – ZT XL 48
(SN 000101 +)

Table of Contents

Questions and Answers

  • M
    Mike GayAug 13, 2025
    Why won't my Gravely Lawn Mower engine start?
    • O
      obrownAug 14, 2025
      There are several reasons why your Gravely Lawn Mower engine might not be starting. It could be due to the Safety Interlock System not being engaged or being faulty. Another reason could be that the fuel tank is empty or the fuel supply is contaminated, so you should fill the fuel tank or replace the fuel with clean fuel. Also, the battery might be discharged, or the connection between the battery and battery cables may be poor, so ensure to charge the battery or tighten/clean the battery and battery cables. Finally, the spark plug wires could be loose or the spark plugs faulty, so connect the spark plug wires or replace the spark plugs.
  • K
    Kevin HallAug 17, 2025
    What to do if Gravely Lawn Mower has poor cutting quality?
    • M
      Mark DavisAug 17, 2025
      If your Gravely Lawn Mower has poor cutting quality, consider the following: * Check if the mower blades are level or the mower deck pitch is incorrect. * See if the mower blades are dull or faulty—sharpen or replace them as needed. * Reduce your mowing speed. * Avoid setting the cutting height too low; for very tall grass, mow twice.
  • R
    rthomasAug 20, 2025
    What to do if Gravely ZT X Lawn Mower does not drive?
    • M
      millsrachelAug 20, 2025
      If your Gravely Lawn Mower isn't driving, the transaxles might be bypassed, so engage the levers.
  • C
    Christopher JacksonAug 25, 2025
    Why does my Gravely ZT X Lawn Mower engine run rough?
    • J
      John TurnerAug 25, 2025
      A rough-running engine in your Gravely Lawn Mower could be caused by a few things. If your model is 915255, 915256, 915257, 915261, 915262, 915263, 915264, or 915274, check that the choke control knob is in the off position. Also, the air filter cartridge might be plugged, so clean or replace it.
  • A
    Amanda AndersonAug 28, 2025
    What to do if my Gravely Lawn Mower is not tracking straight?
    • T
      tyleralvarezAug 28, 2025
      If your Gravely Lawn Mower isn't tracking straight, start by checking the tire pressure. Also, the steering levers may need adjustment, so adjust the steering levers.
  • P
    Pamela BrownSep 1, 2025
    Why is my Gravely ZT X Lawn Mower overheating?
    • J
      jasonharrisonSep 1, 2025
      If your Gravely Lawn Mower engine is overheating, it might be due to a low engine oil level, so add engine oil. Another cause could be plugged cooling fins, so clean the engine.
  • J
    jasminmartinezSep 5, 2025
    What to do if PTO malfunctions in Gravely Lawn Mower?
    • C
      carriearcherSep 5, 2025
      If the PTO is malfunctioning on your Gravely Lawn Mower, make sure the operator presence switch is activated by sitting on the operator seat.
  • C
    Cynthia WalkerSep 8, 2025
    What to do if Gravely Lawn Mower moves with engine off and parking brake engaged?
    • W
      williamsnicholasSep 8, 2025
      If your Gravely Lawn Mower moves with the engine off and the parking brake engaged, the parking brake likely needs adjustment.

Summary

WELCOME

Register Your Product!

Registering the product activates warranty and establishes communication.

Manuals

Information on obtaining and reading owner's and engine manuals.

Disclaimer

AriensCo reserves the right to change products and manual details.

SAFETY

General Safety Information

Covers safety alert symbols, signal words, and general warnings.

Safety Decals

Visual reminders of safety information on the machine.

Safe Operating Practices

Guidelines for operation, specific hazards, and service safety.

ASSEMBLY

Unit Preparation

Unpacking the unit, securing cables, and seat connections.

Component Assembly

Instructions for assembling steering levers.

Chassis Adjustments

Adjusting deck lift pedal and caster wheel height.

CONTROLS AND FEATURES

Operator Controls

Identifies and explains ignition, throttle, choke, PTO, and deck controls.

Safety and Steering

Details seat adjustment, parking brake, interlock system, and steering levers.

OPERATION

Before Operating Procedures

Steps for checking fuel, oil, safety interlock, and setting cutting height.

Starting and Mowing

Procedures for starting the engine and operating the mower.

Stopping and Transport

Instructions for stopping the engine, moving manually, and unit transport.

MAINTENANCE AND ADJUSTMENTS

Maintenance Schedule and Tasks

Routine checks, lubrication, and fluid change intervals.

Component Checks and Adjustments

Covers tire pressure, fasteners, battery, belts, hydraulics, and steering.

TROUBLESHOOTING

Engine and Drive System Issues

Addresses problems with starting, rough running, overheating, and drive.

Operational and Quality Problems

Covers PTO malfunctions, unit movement, tracking, and cutting quality.

STORAGE PROCEDURES

Short-Term and Long-Term Storage

Guidelines for preparing the unit for storage.

Start-of-Season Preparation

Steps to ready the unit after a period of storage.

ACCESSORIES

Available Attachments

Lists compatible accessories and their part numbers.

SPECIFICATIONS

Model and Engine Details

Provides information on model numbers, engine type, and displacement.

Dimensions, Tires, and Deck

Details unit size, weight, tire specifications, and mower deck.

WARRANTY INFORMATION

Warranty Coverage and Exclusions

Outlines warranty periods, what is excluded, and limitations.

Customer Responsibilities

Details owner's duties for warranty service and maintenance.

Gravely ZT X Specifications

General IconGeneral
Engine BrandKawasaki
Engine Displacement726 cc
Fuel Capacity3.5 gallons
Deck MaterialSteel
Seat TypeHigh back
Spindle MaterialAluminum
Turning RadiusZero-turn
Warranty3 years
Cutting Height1.5 - 4.5 inches
Engine Power21.5 HP

Related product manuals