Gravely ZT Series User Manual

GB - 15
TIPPING THE SEAT FORWARD
Remove clamping knob and tip seat forward
to access the battery and engine.
Tip seat back and secure to unit with
clamping knob (figure 12).
25 Hours
or Every
Season
Check
Battery
Keep battery and battery terminals clean (see Cleaning Battery
and Battery Cables on page 20).
Lubricate
Unit
Apply grease to zerk (1) on
each front wheel
50 Hours
or Every
Season
Check
Fasteners
Check mower blade mounting hardware and all other fasteners.
Replace fasteners that are missing or damaged. Tighten all nuts
and bolts to the correct torque value.
100 Hours
or Every
Season
Check All
Belts
Replace worn or deteriorated belts.
• Check hydrostatic belt (see Hydrostatic Belt Replacement
on page 23 for hydrostatic belt location).
• Check PTO belt (see PTO Belt Replacement on page 22 for
PTO belt location).
Check
Mower Blade
Stopping
Time
See Test Mower Blade Stopping Time on page 23 (915044, 046,
048, 050).
Interval Task Action
1
SERVICE AND ADJUSTMENTS
WARNING: AVOID INJURY. Read
and understand the entire Safety
section before proceeding.
OE0300
Figure 12
1
2
1. Clamping Knob
2. Seat Tipped Forward

Gravely ZT Series Specifications

General

Deck Material	Steel
Deck Construction	Fabricated
Turning Radius	Zero-Turn
Engine Brand	Kawasaki
Cutting Width	60 inches
Transmission	Hydrostatic
Cutting Height Range	1.5-5 inches
Warranty	3-year limited
Category	Zero-Turn Mower
Type	Commercial