To Next PageTo Next PageWhat to do if my Gravely Lawn Mower does not track straight?
If your Gravely Lawn Mower does not track straight, begin by checking the tire pressure and ensuring it matches the recommended specifications. If the issue persists, the steering levers may need adjustment. If the problem continues, the transaxles and/or linkages may require adjustment, which necessitates contacting your Gravely dealer.
Why does my Gravely ZT XL 42 Lawn Mower engine run rough?
A rough-running engine in your Gravely Lawn Mower could be caused by a few things. If your model is 915255, 915256, 915257, 915261, 915262, 915263, 915264, or 915274, check that the choke control knob is in the off position. Also, the air filter cartridge might be plugged, so clean or replace it.
What to do if my Gravely ZT XL 42 Lawn Mower is not tracking straight?
If your Gravely Lawn Mower isn't tracking straight, start by checking the tire pressure. Also, the steering levers may need adjustment, so adjust the steering levers.
Why is my Gravely ZT XL 42 Lawn Mower overheating?
If your Gravely Lawn Mower engine is overheating, it might be due to a low engine oil level, so add engine oil. Another cause could be plugged cooling fins, so clean the engine.
General| Engine Brand | Kawasaki |
|---|---|
| Engine Displacement | 726cc |
| Cutting Width | 42 inches |
| Transmission Type | Hydrostatic |
| Deck Material | Steel |
| Number of Blades | 2 |
| Turning Radius | Zero-turn |
| Fuel Capacity | 2.8 gallons |
| Speed | 7 mph |
| Wheel Size | 11 x 4 inches (front), 18 x 8.5 inches (rear) |
Understand and follow all safety decals for machine operation.
Learn about amputation, discharge, tipping, and service hazards.
Understand bystander, loss of traction, hot parts, and rotating parts hazards.
Key checks and preparations before starting the engine.
How to start, control, and maneuver the unit during use.
Detailed steps for safely starting the engine under various conditions.
Recommended service intervals for various checks and tasks.
How to test the safety interlock system for proper function.
How to check and maintain the engine oil level.
Procedures for removing, sharpening, balancing, and installing mower blades.
Procedures for changing the hydraulic fluid and filter.
Adjust deck height, level, and blade pitch for optimal cutting.
Solutions for engine not starting or running rough.
Troubleshooting for drive system, PTO, and operator presence issues.
How to fix issues with unit not tracking straight or creeping.
Solutions for poor cutting quality due to blades or speed.
