Book Topics
GrIP User’s Guide
Chapter 5 – GrIP Software
Chapter Topics
...GrIP Control Center (GCC), Cont’d.
Auto Joystick Mode Switching
This option is selected by default, and in most cases, you should leave
it selected. When this option is enabled (selected), the GrIP driver will
automatically put the GrIP MultiPort (if there is one attached) into
GamePad Emulation mode when a game tries to access the joystick
port directly. If a GamePad Pro is attached and this situation occurs,
GCC will pop up a message, instructing you to switch the pad’s mode
switch into GamePad Mode.
This option can occasionally cause problems when you are using a
GrIPKey set to play a game in keyboard emulation. If GCC tells you to
switch to GamePad Mode while your GamePad Pro is configured with
a GrIPKey set, or if your MultiPort switches into Emulation Mode while
you are using a GrIPKey set, you should disable the Auto Joystick Mode
Switching option.
To Next Page
Loading...