Great day MIGHTY-LITE REAR RACK User Manual

MIGHTY-LITE REAR RACK
MODEL: MLRR60
READ ALL INSTRUCTIONS BEFORE USING THE MITEY LITE REAR RACK
NOTE: Failure to read instructions before use could result in injury or death.
Instructions for Installation and Use:
FIG. 1
FIG. 1A
CONTENTS: SEE FIG. 1
8-1/4” X 2 ½” BOLTS, 4-2 HOLE PLATES
WITH RIV-NUTS, 4-2 HOLE PLATES
TOOLS NEEDED:
DRILL WITH ¼” DRILL BIT, TAPE
MEASURE, MARKER OR PEN AND 7/16”
WRENCH. SEE FIG. 1A

Great day MIGHTY-LITE REAR RACK Specifications

General

Brand	Great day
Model	MIGHTY-LITE REAR RACK
Category	Automobile Accessories
Language	English

Summary

Mighty-Lite Rear Rack Overview

Product Contents and Tools Required

Lists included hardware and necessary tools for installation.

General Warning

Critical warning about reading instructions before use to prevent injury or death.

Installation Steps

Step 1: Position and Center Rack

Place rack on ATV, center using tape measure.

Step 2: Mark and Drill Holes

Mark desired positions and drill holes using a 1/4" drill bit.

Alternative Installation: Riv-Nut Method

Alternative method using riv-nuts and bolts, avoiding drilling.

Finalizing Installation and Safety Precautions

Step 3: Tighten Bolts Securely

Tighten all bolts securely using a 7/16" wrench.

Step 4: Install Riv-Nut Plates

Install riv-nut plates through drilled holes with bolts.

Load Capacity and Passenger Warnings

Warnings against exceeding weight capacity and carrying passengers on the rack.

Cargo Security and Operational Warnings

Emphasizes securing cargo before moving and avoiding adjustments while the ATV is in motion.