Great day UVFR751 User Manual

2-5-15 PAGE 1 OF 5
UTV FRONT RACK
MODEL: UVFR751
READ ALL INSTRUCTIONS & WARNINGS BEFORE USING THE UTV FRONT RACK
NOTE: Failure to read instructions before use could result in injury or death.
Instructions for Installation and Use:
*Note: UTV’s with Round Roll Bar Cages – Refer to Pages 1-4 of this installation Guide
*Note: UTV Front Rack Will NOT FIT Polaris Ranger 570 Midsized UTV with Pro-Fit Roll Cage
*Note: IF INSTALLING ON POLARIS Ranger 570 Full Sized w/ Pro Fit Cage OR Ranger 900/1000 w/ Pro Fit Cage- REFER TO PAGE 5.
CONTENTS
Contents:
1 – UTV FRONT RACK
2 – F SHAPED HORIZONTAL RACK SUPPORTS
1 SET – ROLL BAR ANGLE BRACKETS *THESE
HAVE 3 HOLES ON 1 SIDE. THERE IS A LEFT AND
A RIGHT BRACKET.
1 SET- ROLL BAR ANGLE BRACKETS FOR
VEHICLES WITH WINDSHIELD. (SEE NOTE #1)
2 SETS – BRUSH GUARD ANGLE BRACKETS *THESE
HAVE 2 HOLES ON 1 SIDE AND 1 HOLE ON THE
OTHER SIDE. CHOOSE WHICH SET WORKS BEST
WITH YOUR VEHICLE.
2 – 5/16” X 2 1/4” BOLTS & 2 – 5/16” WINGKNOBS
4 – 5/16” X 2” U-BOLTS
16 – 5/16” LOCKNUTS
8 – 1/4” LOCKNUTS
4 – 1/4" X 3 1/2" BOLTS
4 – 1/4" X 1 3/4" BOLTS
2- 5/16” X 3 1/2'” BOLTS
2- 5/16” X 1 1/4” BOLTS
4 – THIN NYLON WASHERS
2 – MEDIUM NYLON WASHERS
52 – FLAT WASHERS
4 - PLUGS
4 – SETS OF VERTICAL SUPPORT BARS (VARIOUS
LENGTHS)

Great day UVFR751 Specifications

General

Color	Silver
Foldable	Yes
UV Protection	Yes
Reflective Surface	Yes
Compatibility	Universal Fit
Product Type	Car Sun Shade

Summary

UTV Front Rack Installation and Safety

Installation Instructions Introduction

Provides an overview of installation and use, including important notes and compatibility information.

Step 1: Attach Horizontal Support Angles

Details attaching horizontal support angles to the UTV roll bar using provided hardware.

Step 2: Attach F-Shaped Horizontal Supports

Explains measuring and attaching F-shaped horizontal rack supports to the front rack.

Step 3: Connect Support Bars to Brackets

Guides connecting support bars to angle brackets, measuring for vertical support bar selection.

Step 4: Attach Selected Support Bars

Details attaching selected support bars to the front rack angles using specified hardware.

Step 5: Attach Brush Guard Support Angles

Covers attaching brush guard support angles to the bottom ends of vertical support bars.

Step 6: Secure to UTV Brush Guard

Details attaching brush guard support angles to the UTV's brush guard.

Weight Capacity and Critical Warnings

Highlights weight capacity, safety warnings against riding on the rack, and securing cargo.

Polaris Ranger Specific Installation Notes

Provides specific installation steps and notes for Polaris Ranger models, referencing main guide.