How to prevent coulters and openers from plugging in no-till with GREAT PLAINS Farm Equipment?
To prevent coulters and openers from plugging in no-till conditions with your GREAT PLAINS Farm Equipment, drill at a slight angle to the rows.
How to fix uneven seed spacing on GREAT PLAINS 3P606NT?
To address uneven seed spacing or stand with your GREAT PLAINS Farm Equipment, start by reducing field speed. Also, ensure that the feed cups and seed tubes are clean. Check the frame height and consider waiting for drier conditions to avoid ground drive wheel slippage. If the seed cups are too wide, adjust the drive type speed and close the feed cup flutes. Inspect the chain for slack and wear. If mud builds up on the Seed-Lok® wheel, lock it up or wait for drier conditions.
Why is the seed rate inaccurate on my GREAT PLAINS 3P606NT Farm Equipment?
If the actual seed rate differs from the desired rate on your GREAT PLAINS Farm Equipment, check the tire pressure and frame height. Clean out any seed treatment buildup in the feed cup. Also, verify the gearbox, sprocket, seed-rate handle, and seed door settings.
How to correct uneven seed depth with GREAT PLAINS Farm Equipment?
To correct uneven seed depth with your GREAT PLAINS Farm Equipment, reduce field speed and wait for drier weather conditions. Also, ensure the drill is level.
Why is GREAT PLAINS 3P606NT cracking too many seeds?
If you're experiencing excessive seed cracking with your GREAT PLAINS Farm Equipment, reduce field speed. Ensure the feed cup flutes are open to a wider position.
What to do if press wheels are not compacting soil properly with GREAT PLAINS 3P606NT?
If the press wheels on your GREAT PLAINS Farm Equipment aren't compacting the soil as desired, wait until drier weather or rework the ground. Increase down pressure on openers.
Why are the press wheel and openers plugging on my GREAT PLAINS 3P606NT?
If the press wheel or openers are plugging on your GREAT PLAINS Farm Equipment, wait until drier weather. Replace disc bearings and scraper. Reduce down pressure on openers.
How to fix boxes not emptying evenly on GREAT PLAINS Farm Equipment?
If the boxes on your GREAT PLAINS Farm Equipment are not emptying evenly, load more material than required and redistribute when reloading. Set all doors the same, per seed size. Remove any seed plugs and clear any blockages in the meter or tube.
What causes coulters not going deep enough on GREAT PLAINS 3P606NT?
If the coulters on your GREAT PLAINS Farm Equipment are not going deep enough, adjust coulters. Add weight when all rows are affected. Reduce row down pressure to standard and set coulters to prepare furrow more aggressively.
How to adjust depth if coulters and drill are going too deep with GREAT PLAINS Farm Equipment?
If the coulters and drill on your GREAT PLAINS Farm Equipment are going too deep, set press wheels to a shallower depth.
Outlines safe procedures for performing maintenance on the drill.
Warns about crushing hazard during hitching.
Warns about high pressure fluid hazards.
Lists essential checks before using the drill.
Instructions for hitching the tractor to the drill.
Guides on setting the drill's height and ensuring it is level.
Lists critical checks before starting drill operation.
Provides guidance for transporting 3-point and pull-type models.
Safety precautions and steps for loading seed into the drill.
General steps for operating the drill in the field.
General| Type | No-Till Drill |
|---|---|
| Hitch Type | 3-point |
| Row Spacing | 7.5 inches |
| Opener Spacing | 7.5 inches |
| Seed Hopper Capacity | 454 L |
To Next Page