Do you have a question about the GREAT PLANES Revolver .61 and is the answer not in the manual?
Details on the minimum 4-channel radio system and servos required for the Revolver 61 ARF.
Recommended engine/motor sizes, ESC, battery, and propeller for the Revolver 61 ARF.
Specifications for LiPo battery packs, series connectors, and recommended chargers.
List of hardware, adhesives, and building supplies needed to complete the Revolver 61 ARF.
List of optional tools that can assist in building the Revolver ARF.
Key considerations and tips for successful assembly, including fitting and glue usage.
Information on how to order replacement parts for the Revolver 61 ARF.
Guidance on inspecting kit parts for quality and identifying components in the kit.
Instructions for installing aileron servos and pushrods into the wing panels.
Steps for assembling the tail section, installing servos, and mounting the landing gear.
Guidance for installing glow engines or brushless motors, including fuel tank setup.
Steps for installing the receiver, cowl, canopy, pilot, and applying decals.
Steps to install batteries, check controls, set throws, and balance the model.
Covers identifying the model, charging batteries, balancing props, and ground checks.
Details on engine safety, lithium battery care, AMA safety code, and safe flying practices.
Final pre-flight checklist and advice on adjusting fuel mixture for optimal engine performance.
Guidance on takeoff, flight maneuvers, and landing the Revolver aircraft.
| Skill Level | Intermediate |
|---|---|
| Radio System | 4-channel |
| Control Throws-Ailerons | 3/8 in (9.5 mm) up/down |
| Construction | Balsa and plywood |
| Servos | 5 standard |












Loading...