GReddy Turbo Kit - Page 5

―５―
66．Bracket Intercooler １
67． 〃 Air pump １
68． 〃 Vacuum Tank １
69． 〃 Air Diversion Panel １
70． *No longer used in this kit*
71
． 〃
Pressure Sensor
１
72．Pressure Sensor Adapter １
73．Hose Union ５φ－１/８ＰＴ １
74．１９φHose Union １
75．Rubber Mount ２
76．Clip ３
77．Air Duct ５０φ×１０００㎜ １
78．Thermo Cloth １００×１０００㎜ ２
79．Zip Tie １００㎜（Black） １０
80．Zip Tie ２００㎜（Black） １０
81．Ｍ４×１８㎜ P0.7 ＋ Head B － － N (Pressure Sensor) ２
82．Ｍ５×１２㎜ P0.8 ＋ Head B － － N (Sec. Air Solenoid Valve) １
83．Ｍ６×１５㎜ P1.0 Stainless B S/W － －
(Oil filter re-locater stay)
２
84．Ｍ６×１５㎜ P1.0 Stainless B S/W F/W －
(Oil Return, Baffle plate stay)
3
85．*No longer used in this kit*
86．Ｍ６×２５㎜ P1.0 Stainless B S/W F/W －
(Pressure Sensor Stay)
2
87
．Ｍ６
Flange Nut
Ｐ
1.0 Steel
(Rubber Mount) ２
88．Ｍ８×１５㎜ P1.25 Stainless B S/W － －
(Oil filter re-locater stay)
２
89．Ｍ８×１５㎜ P1.25 Stainless B S/W F/W N
(Air pump, I/C, I/C stay, C-4)
６
90．Ｍ８×20 ㎜ P1.25 Stainless B S/W F/W －
(Turbine Compressor IN/OUT
４
91
．Ｍ８
×30
㎜
P1.25 Stainless Stud B S/W
－
N
(Turbine Exhaust IN/OUT) ９
92．Ｍ１０×２０㎜ P1.25 Stainless B S/W F/W N
(Downpipe Stay)
１