6.2.3.9 Display
6.2.3.9.1 Display of Run Icon and Mode Icon
Once eneygized, all icon will flash in dynamic. When the unit is turned on by remote controller, the RUN icon and the preset
Mode icon are bright at the same time. If the light key is turned off, only the RUN Icon is bright. When the unit is switched
off, all icons except the power indicator are black.
When turn on the unit,the Dual 8 nixietube will display preset temperature(range from 16 to 30 ).When PG motor locked
℃
6.2.3.9.2 Display of Dual 8 nixietube
protection occurs, the nixietube will display "H6".
6.2.3.10 Memory
remote control signal do not set timer function, will memorize the last remote control signal and run according to it. If the last
remote control signal has set timer function, the system is de-energized before the set time,when re-energized, the system
Memory contents: Mode, UP/DOWN Swing, light,Set temp, Set fan speed.
After de-energized, and re-energized, the unit will start to run with the memory function automatically. The system, if the last
will memorize the timer function, the set time will recalculate. If the last remote control signal has set timer function and the
system is de-energized after the set time, when re-energized, the system will memorize the running status before de-energized.
To Next Page
Loading...
