Gree Bright Series

77
77
7
Disassembly and Assembly Procedures
Disassembly Process of Indoor Unit
Operating Procedures / Photos
Disassemble Front Panel and
Electric Box Top Cover
Loosen the clasps on the two side, pull open the front
panel, pull out the two connection terminals of display
screen, pull out the clasp on the back from the groove
and take out the front panel. Unscrew the fixing screws
on the elextric box top cover, open the top cover, loosen
the clasp, and then remove the elextric box top cover.
(refer to Fig.7-1)
Fig.7-1
elextric box
panel
screw
connection
terminal
top cover
Disassemble Filter
Pull the filter upward to loosen the clasp and then pull
out the two filters.
(refer to Fig.7-2)
Fig.7-2
Filter
(refer to Fig.7-3)
Disassemble Guide Louver
Fig.7-3
Guide Louver
Manually bend the guide louver to remove
the guide louver.