Gree Bright Series - Page 48

Operating Procedures / Photos
Fig.7-19
Fig.7-18
Fig.7-17
Fig.7-16
Disassemble Front Case
Unclench the three screw covers,unscrew the three
screws fixing the front case, loosen the fore-and-aft
clasps and remove the front case.
(refer to Fig. 7-16)
screw screw covers
(refer to Fig. 7-17)
(refer to Fig. 7-18,7-19)
Disassemble Cover of Electric Box
Loosen the three clasps, and remove the cover of the
electric box.
clasps
Disassemble Water Tray
Loose the clasp at the left side, and disconnect
the
terminal of the stepping motor and take out
the
water tray .
( Pay attention not to damage the drainage pipe).
clasp
water tray
terminal