Operating Procedures / Photos
Disassembly Process of Indoor Unit
Disassemble Front Panel and
Electric Box Top Cover
Loosen the clasps on the two side, pull open the front
panel, pull out the two connection terminals of display
screen, pull out the clasp on the back from the groove
and take out the front panel. Unscrew the fixing screws
on the elextric box top cover, open the top cover, loosen
the clasp, and then remove the elextric box top cover.
(refer to Fig.7-13)
Fig.7-13
elextric box
panel
screw
filter
guide louver
top cover
Fig.7-14
Fig.7-15
Disassemble Filter
Pull the filter upward to loosen the clasp and then pull
out the two
filters.
(refer to Fig.7-14)
Disassemble Guide Louver
Manually bend the guide louver to remove
the
guide louver.
(refer to Fig.7-15)
Bright Series
To Next Page
Loading...
