Gree Bright Series

Operating Procedures / Photos
(refer to Fig. 7-30)
(refer to Fig. 7-29)
(refer to Fig. 7-28)
Fig.7-29
Fig.7-30
Fig.7-28
Disassemble Cabinet
Unscrew the screws fixing the cabinet
to remove the cabinet .
screws
Disassemble Electric Box
Screw
Pull out the terminal pin of fan motor and the
connecting wire of the compressor ,unscrew
the 2 tapping screws fixing the electric box,to
take out the electric box.
screws
screws
Disassemble Rear Side Plate
Unscrew the screws fixing the rear side plate
and take off the rear side plate.
Bright Series