Operating Procedures / Photos
Disassemble Cabinet
Unscrew the tapping screws between the panel
and the motor suport and side plate of condenser,
then take out the panel .
(refer to Fig. 7-42)
(refer to Fig. 7-41)
(refer to Fig. 7-40)
Fig.7-42
Fig.7-40
Fig.7-41
Screw
Cabinet
Disassemble Rear Side Plate
Unscrew the 9 screws at the rear side plate
and take off the rear side plate.
Screw
Disassemble Electric Box
compressor, reactor and 4-way valve and
then take out the electric box.
Unscrew the 4 screws at the cover of the
electric box to take out the cover.
Unscrew the 2 screws fixing the electric box,
pull out the terminal pins of fan motor,
Screw
Bright Series
To Next Page
Loading...
