15
Cleaning the Filter
• To open the panel, pull the grooves at both sides of
the panel to open the panel to the angle shown in
Fig. 1.
• Remove and clean the filter by using a duster or a
damp clean cloth. If the filter is dirty, you can use
warm water with mild soap, lay to dry. Do not use
hairdryer or other any other drying device.
• Once filter is completely dry, re-install the filter, and
then close the panel cover tightly as shown in Fig. 2
• Do not operate the air conditioner when the filter is
not installed.
Maintenance
• Check the filter once every month or approximately
250hrs of use, to see if cleaning is necessary. If
there is a lot of dust in the operation environment,
then clean more frequently.
• Do not touch the metal fins in the air conditioner
when removing the filter.
• To clean panel surface, wipe with a soft dry cloth.
• Check the coils on the outdoor side of unit
periodically
to ensure they are not clogged with dirt or debris.
WARNING
• Turn off the air conditioner and disconnect the power cord from outlet before cleaning the
air conditioner to avoid electric shock.
• Do NOT wash the air conditioner with water to avoid electric shock.
• Do NOT use harsh cleansers to clean the air conditioner.
• To prevent injury, when the air filter needs to be removed, do not touch the metal parts of the unit.
CLEANING AND MAINTENANCE
Fig. 1
Fig. 2
Front Panel
Front Panel
NOTICE:
This picture is for reference only. Please refer to the actual product for the appearance.
Filter
To Next Page
Loading...
