Gree GAA07AA-D3RNA2C

Service Manual
Installation and Maintenance
55
propeller housing
ProcedureStep
centrifugal blade
motor
13.Remove propeller housing sub-assy
14.Remove centrifugal blade sub-assy
15.Remove outdoor motor
screw
Twist off the screws used for xing the
motor and then remove the motor.
Twist off the nuts used for xing the blade,
take out the washer and then remove the
centrifugal blade.
Twist off the screws used for xing the
propeller housing, pull it upward forcibly
and then remove the propeller housing
sub-assy.
washer
nut
screw