15
Cleaner
●
Don’t use petrol, volatile oil, lacquer thinner, putty-powder or kerosene.
(Otherwise electric shock, fi re or damage of the parts may be incurred.)
●
The unit can’t be washed by water.
(Otherwise, electric shock, fi r or malfunction may be incurred.)
Air inlet of sensor of
the unit
Water tank
Accumulated dust
Wipe it
●
Use cleaner to clean
dust around air inlet
and the unit.
●
If the dirt is hard to
clean, use a wet cloth
with a little of neutral
detergent to wipe it.
●
Use dry cloth to wipe
the unit.
Fill water for
every time
The surface
is dirty
Wash it with water
Clean inside of water tank:
●
Fill water in water tank
and shake water tank
fi ercely for 5~10 seconds.
Then pour out water.
●
If the inside is very
dirty, add a little of neutral
detergent in water and
shake water tank fi ercely
for 5~10 seconds. Then
pour it out and clean
it with clear water
subsequently.
Clean appearance of water tank:
●
Wipe it with dry cloth after
cleaning it with clear
water.
●
Add a little of neutral
detergent in water to
wash the tank.
Once a month or
there is dirt or odor.
(Please refer to page 16 and
page 17 for maintenance.)
Once a month or
there is dirt or odor.
(Please refer to page 16 and
page 17 for maintenance. )
Press and clean it.
Water tray
Filter subassembly
Wipe it
Wash it with water
To Next Page
Loading...