19
Replacement of Filter and Filter
cotton
1. Remove the dust collector assy (as following picture shows), then remove the fi lter
behind the collector.
●
Press the clamp on dust collector rack by hand, to remove the fi lter.
White surface
White surface
2.Assemble new fi lter
●
Fill the starting use date on fi lter’s label with signature pen (Y/M)
●
Assemble the fi lter into dust collector rack, be noted that the clamp should be
proper assembled and the white side should be kept outward.
●
Assemble the whole dust collector into the unit. (see preparation before use)
Service life for replacement when the unit is operated for accumulative 2000 hours
Service life for replacement 3 months
Take out the fi lter sub-assy, remove the fi lter cotton as above steps. (see P8 for replacement
method)
Filter replacement method
Filter cotton replacement method