157
9.Mount the water tray
and screw the screws
Mount the water tray and
screw the screws
◆ Removal and Assembly of drainage pump
Remark: Prior to the assembly of the drainage pump, make sure the power supply is cut off.
Steps Illustrations Operation Instructions
1.Unscrew the fixed screws
of the water tray
Unscrew the fixed
screws of the water tray
2.Remove the water tray
Remove the water tray
3. Pull out the drainage pipe
and unscrew the fixed
screws the water pump.
Pull out the drainage pipe
and unscrew the fixed
screws the water pump.
To Next Page
Loading...